Micro Hardness Tester

Micro Hardness Tester

Approx Price: Rs 4.25 Lakh / Piece(s) 

With Vickers hardness and Knoop hardness testing capabilities, and testing force can be extended to 2KG.

Specification :

Test force

10g (0.098N), 25g (0.245N), 50g (0.49N), 100g (0.98N), 200g (1.96N), 300g (2.94N), 500g (4.9N), 1000g (9.8N)

Rulers

HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2

Minimum measurement unit

0.25μm

Measuring the hardness range

1HV-4000HV

Hardness value read

Digital LCD

Total magnification

100X (observed), 400X (measurement)

(Expandable up to 200X or 600X)

Loading mode

Fully automatic (loading, dwell, unloading)

Holding Time

1-99 seconds

The objective lens and the press head switch

The manual transfer Taqie change

Specimen allows a maximum height

85mm

Indenter center to wall distance

110mm

Instrument Size

405 × 290 × 480mm (L × W × H)

Instrument Weight

45kg

Light source

LED cold light source (continuous 24-hour use life of up to 100,000 hours)

Power supply

110V/220V + 5%, 50/60 Hz

XY table

Dimensions: 100 × 100 mm, the largest mobile: 25 × 25mm Minimum reading: 0.01mm

(Optional digital XY table, LCD digital display)

Data Output

Built-in printer (hardness values, maximum and minimum test time, the number of tests, the average)

Built-in RS-232 interface

Implementation of standards

GB/T4340.2 national standards, JJG151 VRof

Standard fittings, accessories

10X eyepiece micrometer a Vickers indenter a 10X and 40X objective lens of each one, and two standard hardness block, XY table, flat fixture, sheet fixtures, small parts jig a leveling screw four a bubble level, the power cord is a dust cover a manual, hardness conversion tables, certificate, warranty card, accessory case a

 


 

 


 


Additional Information:
  • Item Code: MV-3

Micro Hardness Tester with Computer

Approx Price: Rs 5.25 Lakh / Piece(s) 
Specifications:

Test force

10g (0.098N), 25g (0.245N), 50g (0.49N), 100g (0.98N), 200g (1.96N), 300g (2.94N), 500g (4.9N), 1000g (9.8N)

Rulers

HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2

Minimum measurement unit

0.25μm

Measuring the hardness range

1HV-4000HV

Hardness value read

Digital LCD

Total magnification

100X (observed), 400X (measurement)

(Expandable up to 200X or 600X)

Loading mode

Fully automatic (loading, dwell, unloading)

Holding Time

1-99 seconds

The objective lens and the press head switch

The manual transfer Taqie change

Specimen allows a maximum height

85mm

Indenter center to wall distance

110mm

Instrument Size

405 × 290 × 480mm (L × W × H)

Instrument Weight

45kg

Light source

LED cold light source (continuous 24-hour use life of up to 100,000 hours)

Power supply

110V/220V + 5%, 50/60 Hz

XY table

Dimensions: 100 × 100 mm, the largest mobile: 25 × 25mm Minimum reading: 0.01mm

(Optional digital XY table, LCD digital display)

Data Output

Built-in printer (hardness values, maximum and minimum test time, the number of tests, the average)

Built-in RS-232 interface

Implementation of standards

GB/T4340.2 national standards, JJG151 VRof

Standard fittings, accessories

10X eyepiece micrometer a Vickers indenter a 10X and 40X objective lens of each one, and two standard hardness block, XY table, flat fixture, sheet fixtures, small parts jig a leveling screw four a bubble level, the power cord is a dust cover a manual, hardness conversion tables, certificate, warranty card, accessory case a

Optional

Image analysis software, metallurgical equipment, Knoop indenter Knoop hardness block, 15X eyepiece micrometer, 2.5X objective lens, 20X objective lens, 60X objective lens

       

Vickers Hardness Tester

Approx Price: Rs 4.45 Lakh / Piece(s) 

Our organization is counted among the reliable manufacturers of Vickers Hardness Tester. Our patrons can avail these products that are developed by a diligent team of experts employing technologically advanced machines and tools. To meet the diverse demands and requirements of the clients, we offer these testers at the most comprehensive range of price.

 

Features:

 

  • Cost-effective

  • Highly durable

  • Optimality

  • High performance

  • Seamless finish

  • Competitive price

  • Wide industrial use

Brinell Hardness Tester

Approx Price: Rs 1.5 Lakh / Piece(s) 

With the aid of our expert team having technically strong background, we are able to render a comprehensive range of Brinell Hardness Tester. The offered products are precisely designed and developed by our team of experts in a highly sophisticated premise.

 

Model: SE-AKB-3000

 

Specification:

 

  • Loads (kgf): 500 to 3000 in steps of 250

  • Initial load (kgf): 250

  • Max. test height x throat (mm): 380 x 200

  • Max. Depth of elevating screw below base (mm) approx: 180

  • Machine height (mm) approx: 1150

  • Size of base (mm) approx: 400 x 740

  • Net weight (kg) approx: 325

  • Drive Motor (hp): 0.5

  • Mains supply: 3 phase, 415V, 50Hz, A.C

  • Indentation Measurement: by separate microscope

Microhardness Tester

Approx Price: Rs 3.95 Lakh / Piece(s) 

With the firm commitment to quality, we are able to come up with assured quality range of Microhardness Tester. These are widely used for various industrial applications for measuring the micro hardness of thin, small metal test piece and the brittle materials and may also make the test of knoop hardness when a knoop penetrator is fitted.

 

Specification:

 

  • Measuring range: 5-300 HV

  • Test Force: 10,25,50,100,200,300,500,100 gf

  • Magnification of the measuring system: 500x, 125x

  • Min scale value of measuring microscope: 0.025um

  • Max Height of test piece: 75mm

  • Depth of throat: 100mm

  • Power Supply: 220V A.C

  • Dimensions: 340x 160x 375mm

  • Weight: Approx 40 kg

Digital Rockwell Hardness Tester

Approx Price: Rs 1.4 Lakh / Piece(s) 

We are among the prominent industry engaged in offering a wide range of Digital Rockwell Hardness Tester to our clients at the most reasonable price. These products are widely used in various industrial application which finally results in better productivity.

 

Features:

 

  • Motorized system for application and removal of major load

  • Minor load setting by LED bar graph

  • Keyboard entry for scale selection

  • Hi-Low-OK indication for hardness value

  • Easy to read, large size extra bright 7 segment display

  • Centronics parallel port for connecting Dot Matrix Printer

  • Manual operation available in case of motor failure

  • Sufficient error codes for smooth functioning of machines

  • Serial Interface (Optional)

  • Indenter is guided in linear bearings facilitates to test small diameter jobs

  • Automatic weight selection by thumb wheel

  • The additional test load of 187.5 Kg for brinell scale

  • Brinell microscope is provided for brinell indentation measurement

  • Manual weight selection

  • Separate lever is provided for selection of minor load

Rockwell Hardness Tester

Approx Price: Rs 30,000 / Piece(s) 

As a quality-centric organization, we are able to come forth with the wide spectrum of Rockwell Hardness Tester for our respected costumers. These products are used for carrying out hardness tests on metals and alloys of all kinds hard or soft, from carbides to plastics, covers standard scales A,B,C,D,E,F,G,H and K also additional scales L,M,P,R,S and V.

 

Features:

 

  • Cost-effective

  • Highly durable

  • Optimality

  • High performance

  • Seamless finish

  • Competitive price

  • Wide industrial use

Brinell Hardness Tester

Approx Price: Rs 2.9 Lakh / Piece(s) 

TECHNICAL PARAMETERS

Model

DM-HBE-3000M

Brinell scale

HBW2.5/62.5 HBW2.5/187.5 HBW5/125 HBW5/750

HBW10/100 HBW10/250 HBW10/500 HBW10/1000 HBW10/1500 HBW10/3000

Test force

62.5kgf(612.9N) 100kgf (980.7N) 125kgf (1226N) 187.5kgf (1839N 250kgf (2452N)500kgf (4903N) 750kgf (7355N) 1000kgf (8907N) 1500kgf (14710N) 3000kgf (29420N)

Min. measuring unit

0.005mm

Hardness value read

Digital LCD

Total amplification

20X

Specimen max. height allowed

230mm

Size

550×210×750mm L×W×H

Weight

120kg

Dwell time

5 60S

Power supply

AC220V + 5%, 50~60 Hz

Standard accessories

20X measuring objective 1 piece, Φ2.5 Φ5Φ10mm harden alloy indenter 1 piece, standard hardness block 2 pieces, big, medium and “V” test table each 1 piece, power cable 1 piece, accessory box 1 set, dust-proof cover 1 piece, manual instruction,


Additional Information:
  • Item Code: DM-HBE-3000M

Automatic Digital LCD Micro Hardness Tester

Approx Price: Rs 7.5 Lakh / Piece(s) 

Video measurement automatic turret digital micro Vickers hardness tester is added a video measurement system on the basis of automatic turret digital micro Vickers hardness tester. The indentation can be clearly displayed on the 8 inch LCD screen in the course of the operation.Data can be observed by many people at the same time and can be measurement directly. Reduced manual operation errors and avoiding visual fatigue. So, the testing efficiency is greatly improved.

Main functions and features:

1. Special designed for improving the working efficiency of our customers as its automatically design. After adjusting the focal length, the objective lens and indenter can be switched automatically. And the testing force can load, dwell and unload automatically. Then the objective lens will automatically return to the initial focus state, and the length of indentation can be measured directly.

2. Coating adopted car paint technology with white color. Looking more decent, and with the advantage of fullness, high gloss and more scratch resistance. Used for many years looking still bright as new.

3. The independent research and development of lifting system and positioning system, ensured the accuracy and repeatedly of the testing process.

4. The optical system designed by senior optical engineer (who worked in the Shanghai Optics And Fine Mechanics Institute, Chinese Academy of Science) not only meet the definition of hardness testing requirements, but also can observe the microstructure of the material.

5. With Vickers and Knoop hardness testing capabilities and the testing force can be extended to 2KG.

6. Testing method, testing power and duration time can be displayed directly on the LCD screen.

7. According to different visual habits of the operators, the strength of the light source can be adjusted. To avoid the visual fatigue for long time operation.

8. The testing data able to be printed directly by thebuilt-in printer.

9. Reserved image channelcan beconnected with computer, used the image analysis software to analyzing the physical and chemical properties of the material.

Main purpose and the scope of the application:

1. Testing the hardness of metallographic structure, from the most soft material to the most hard material.

2. Carburizing, nitriding, hardened layer, surface coating, steel, nonferrous metals.

3. The hardness of the glass, ceramic materials.

Specification:

Test force

10g (0.098N), 25g (0.245N), 50g (0.49N), 100g (0.98N), 200g (1.96N), 300g (2.94N), 500g (4.9N), 1000g (9.8N)

Rulers

HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2

Minimum measurement unit

0.25μm

Measuring the hardness range

1HV-4000HV

Hardness value read

Digital LCD

Total magnification

100X (observed), 400X (measurement)

(Expandable up to 200X or 600X)

Loading mode

Fully automatic (loading, dwell, unloading)

Holding Time

1-99 seconds


 

 


Additional Information:
  • Item Code: MV-2

Fully Automatic Digital Micro Hardness Tester

Approx Price: Rs 9.75 Lakh / Piece(s) 
The new type Micro Hardness Testers integrated with optics, mechanics and electricity. It is famous as its fashion and decent design,high testing precision, stable functions and simple operation.

Main Features:1. With Vickers hardness and Knoop hardness testing capabilities, and testing force can be extended to 2KG.2. The testing data able to be printed directly by the built-in printer.3. Can be connected with computer, used the image analysis software to analyzing the physical andchemical properties of the material.4. Testing method, testing power and duration time can be displayed directly on the LCD screen. Thehardness value can be displayed directly by entering the indentation diagonal length and avoid thecomplication of the look-up table.5. According to different visual habits of the operators, the strength of the light source can be adjusted.To avoid the visual fatigue for long time operation.6. The independent research and development of lifting system and positioning system, ensured theaccuracy and repeatedly of the testing process.7. The optical system designed by senior optical engineer (who worked in the Shanghai Optics And FineMechanics Institute, Chinese Academy of Science) not only meet the definition of hardness testingrequirements, but also can observe the microstructure of the material.8. Reserved image channelcan be connected with computer, used the image analysis software toanalyzing the physical and chemical properties of the material.

Main Uses:1. Ferrous metals, non-ferrous metals, castings and alloy materials.2. Structure of metal, metal surface processing layer, plating layer, hardening layer ( oxidation, coating anda variety of infiltration layer )3. Heat treatment and carbonation specimen, quenching and mini parts which with miscellaneous point.4. Applicable to the Knoop hardness test of glass, ceramic, agate, precious stones and other non-metallichard but brittle materials. 

Additional Information:
  • Item Code: MV-4

Digital Micro Hardness Tester with Image Analysis Software

Approx Price: Rs 11.25 Lakh / Piece(s) 
  • Introduction
 

The system is composed of Auto Turret Micro Hardness Tester and hardness measurement of the image analysis software (which is connected to the computer). Real time focus and the hardness indentation image can be displayed on the computer through the software. Just through the mouse and the keyboard can complete a variety of test requirements, greatly improve the working efficiency. So, it can provide the perfect solution for experimental analysis.

Main functions and features of the software:

1. The image analysis software (which is developed by our institution) is easy operation with perfect function. And it can be customized various functions to meet the requirements of our most customers.

2. Can measure the Vickers hardness and Knoop hardness, switching the measurement mode easily from dynamic to static or static to dynamic.

3. The indentation image can be measured after magnified 1600 times. And make the magnification of the details of indentation to test the hardness value, avoid the manual operation errors.

4. For smooth surface specimen, the machine can automatically identify the indentation image and automatic measuring diagonal length.

5. Diagonal length, hardness value, the indentation depth and strength of materials can be displayed on real time. And hardness type switched easily.

6. The testing can be designated or continuous, and the hardness depth and gradient map can be draw out directly.

7. The unique Mark point positioning function makes the machine can measure the hardness and analysis material on the specified location.

8. Images can be the adjustment of color, grayscale, contrast, brightness, etc.

9. With the function of diagonal fine-tuning, length measuring and angle measurement.

10. With the measuring results statistical analysis function and the hardness analysis report can be automatic generated and output as Word, Excel formats. The result can be printed out by printer and the data can be preserved in the hardness tester.

11. Support for WIN9X, WINNT, WIN2000, WINXP, VISTA , WIN7 operating system.

Main functions and features of the hardness tester:

1. The machine can be connected with computer just through USB data line. Used the optional purchase accessories image analysis software to analyzing the physical and chemical properties of the material.

 

2. Special designed for improving the working efficiency of our customers as its automatically design. After adjusting the focal length, the objective lens and indenter can be switched automatically. And the testing force can load, dwell and unload automatically. Then the objective lens will automatically return to the initial focus state, and the length of indentation can be measured directly.

3. The independent research and development of lifting system and positioning system, ensured the accuracy and repeatedly of the testing process.

4. With Vickers hardness and Knoop hardness testing capabilities, and testing force can be extended to 2KG.

5. Testing method, testing power and duration time can be displayed directly on the LCD screen.

6. When stand-alone measurement, the hardness value can be displayed directly by entering the indentation diagonal length and avoid the complication of the look-up table.

 

Main purpose and the scope of the application:

1. Testing the hardness of metallographic structure, from the most soft material to the most hard material.

2. Carburizing, nitriding, hardened layer, surface coating, steel, nonferrous metals.

3. The hardness of the glass, ceramic materials.


 

 


Additional Information:
  • Item Code: MV-5

Digital Micro Hardness Tester

Approx Price: Rs 5,000 / No 
Minimum Order Quantity: 1 No
Technical Specification

 

Type

SE-1000DT

Test force

10g (0.098N), 25g (0.245N), 50g (0.49N), 100g (0.98N), 200g (1.96N), 300g (2.94N), 500g (4.9N), 1000g (9.8N)

Rulers

HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2

Minimum measurement unit

0.25μm

Measuring the hardness range

1HV-4000HV

Hardness value read

Digital LCD

Total magnification

100X (observed), 400X (measurement)

(Expandable up to 200X or 600X)

Loading mode

FULLY AUTOMATIC   (loading, dwell, unloading)

Holding Time

1-99 seconds

The objective lens and the press head switch

Manual Turret

Specimen allows a maximum height

85mm

Indenter center to wall distance

110mm

Instrument Size

405 × 290 × 480mm (L × W × H)

Instrument Weight

45kg

Light source

LED cold light source (continuous 24-hour use life of up to 100,000 hours)

Power supply

110V/220V + 5%, 50/60 Hz

XY table

Dimensions: 100 × 100 mm, the largest mobile: 25 × 25mm Minimum reading: 0.01mm

(Optional digital XY table, LCD digital display)

Data Output

Built-in printer (hardness values, maximum and minimum test time, the number of tests, the average)

Built-in RS-232 interface

Implementation of standards

GB/T4340.2 national standards, JJG151 VRof

Standard fittings, accessories

10X eyepiece micrometer a Vickers indenter a 10X and 40X objective lens of each one, and two standard hardness block, XY table, flat fixture, sheet fixtures, small parts jig a leveling screw four a bubble level, the power cord is a dust cover a manual, hardness conversion tables, certificate, warranty card, accessory case a

Optional

Image analysis software, metallurgical equipment, Knoop indenter Knoop hardness block, 15X eyepiece micrometer, 2.5X objective lens, 20X objective lens, 60X objective lens

Micro Vicker Hardness Tester

Approx Price: Rs 5,000 / No 
Minimum Order Quantity: 1 No

SPECIFICATIONS

Models

HV-1000ZDT???Approved by CE certificate, ensure the safety operation of the machine. Certificate No.: GB/1067/3980/12 Issue 1???

Testing Force

10g(0.098N)???25g (0.245N)???50g (0.49N)???100g (0.98N )???200g (1.96N)???300g (2.94N)???500g (4.9N)???1000g(9.8N)

Scale

HV0.01???HV0.025???HV0.05???HV0.1???HV0.2???HV0.3???HV0.5???HV1???HV2

Min. Measuring Unit

0.25μm

Hardness Value Rang

1HV-4000HV

Hardness Value of Reading

Digital LCD Screen

Total Magnification of Microscope

100X???For Observation??????400X???For Measurement???

(Can be extended to 200X or 600X)

Loading Method

Automatically (Load, dwell and unload the testing force???

Duration Time

1-99s

Switch Type of Objective lens and Indenter

Auto Turret (Objective Lenses-Indentor-Objective Lenses switching Automatically)

Specimen Allowing Maximum Height

85mm

Distance from Indenter Center to Fuselage

120mm

Overall Dimension

490×185×515mm???L×W×H???

Net Weight

45kg

Light Source

LED Cold light source (can be continuous use for 24 hours, no heat generated, servicing life can reach 100,000 hours???

Power Supply

110V/220V + 5%, 50/60 Hz

X-Y Testing Table

Dim.:100×100 mm, Max. Travel Range: 25×25mm, Moving Resolution Ratio: 0.01mm

Data Output

Built-in Printer???Hardness Value, The Max. And Min. Value, Testing times and Average Value???

Built-in RS-232 interface

Standard Accessories

1 piece: 10X micrometer eyepiece; 10X and 40X objective lens; Vickers indenter; X-Y Testing Table; Flat Fixture; Small Parts Fixture; Water level; Power line; Dust cover; Instruction Book; Hardness Conversion Tables;Accessory case 2 pieces:

Looking for Micro Hardness Tester ?
© Sumitra Enterprises
 
Desktop Site Back to top